Troubleshooting library
Batocera Troubleshooting Guides
Batocera Black Screen After Boot: Fix the Splash-to-Black Display on USB
Troubleshoot Batocera black screen after boot when booting from USB with a controller. Step-by-step checks for display output, video mode, and recovery.
Batocera Multiple Controllers: Fix No Input at the Menu
Batocera boots from USB but no controller input reaches the menu. Follow these checks to diagnose multiple controller detection and restore input.
Batocera Controllers Not Working on USB Boot: A Step-by-Step Diagnosis
Controller not detected after booting Batocera from USB? Follow these exact checks to diagnose and restore input at the menu.
Batocera Controller Not Detected: Diagnose No Input at the Menu
Fix Batocera controller not detected when booting from USB. Step-by-step checks for cable, port, and controller mode, plus a verification test and recovery note.
Batocera USB Not Booting: Diagnose the Skip Before You Reflash
Your PC skips the Batocera USB and returns to the existing OS. Follow a controlled diagnosis of boot order, USB detection, and firmware mode before reflashing.
Batocera Black Screen After Boot: Diagnose the Splash-to-Black Freeze
Troubleshoot Batocera stuck on a black screen after the splash when booting from USB with a controller. Step-by-step checks, verification, and recovery.
Batocera Multiple Controllers Not Detected: Isolate the Input Fault
Fix Batocera when multiple controllers are not detected at the menu. Step-by-step checks to isolate the input fault before the menu appears.
Batocera Controller Not Detected: Restore Input at the Menu
Fix Batocera controllers not detected at the menu when booting from USB. Step-by-step checks for USB port, cable, mode, and a verification test.
Batocera Controller Not Detected: USB Boot Input Diagnosis
Fix Batocera controller not detected when booting from USB: check ports, cables, input mode, and verify with a controlled test.
Batocera USB Not Booting: Diagnose a PC That Skips the Drive
Fix batocera usb not booting when your PC skips the USB or returns to the existing OS. Step-by-step checks for boot order, USB mode, and secure boot.
Batocera Splash Then Black Screen: Isolate the Display Output Before Reinstalling
A practical troubleshooting guide for when Batocera shows the splash screen and then goes black on a USB-booted PC. Learn to check display output, safe mode, and recovery steps.
Batocera Multiple Controllers Not Detected: Fix No Input at the Menu
Fix Batocera when multiple controllers aren't detected at the menu. Step-by-step checks for USB boot setups, including port swaps, controller mode, and recovery.
Batocera Controllers Not Detected at the Menu: A Step-by-Step Diagnosis
Batocera boots from USB but your controller gives no input at the menu? Follow these focused checks to confirm detection and restore control.
Batocera Controller Not Detected: Isolate the Input Fault Before You Reconfigure
A step-by-step diagnosis for when Batocera boots from USB but your controller is not detected at the menu, with checks, a verification test, and recovery notes.
Batocera USB Not Booting: Diagnose the Skip Before You Rebuild
Fix Batocera USB not booting when the PC skips the drive or returns to the existing OS. Step-by-step checks for boot order, USB detection, and a verification test.
Batocera USB Not Booting: When the PC Skips the Drive and Returns to Windows
Troubleshoot a Batocera USB that does not boot because the PC skips it or returns to the existing OS. Check boot order, USB mode, and verify with a controlled test.
Batocera Multiple Controllers Not Detected: Isolate the Input Path Before the Menu
Batocera boots from USB but no controller input reaches the menu when multiple controllers are connected. Isolate the input path, interpret results, and verify detection.
Batocera Controller Not Detected: Diagnose Input Before the Menu
Step-by-step diagnosis for when Batocera boots from USB but your controller is not detected at the menu. Check ports, cables, and controller mode, then verify input.
Batocera Black Screen After Boot: Isolate the Display Handoff
Batocera splash appears then the display goes black on a USB boot with a controller. Isolate the display handoff with safe checks, a verification test, and a rollback note.
Batocera Black Screen After Boot: Fix the Splash-to-Black Display
Batocera splash appears then the screen goes black on a USB boot? Follow these checks to isolate display output and recover a working picture.
Batocera USB Not Booting: Fix the PC Skipping Your USB Drive
Troubleshoot Batocera USB not booting when your PC skips the USB or returns to the existing OS. Step-by-step checks, verification, and rollback.
Batocera Multiple Controllers Not Detected: Diagnose Input Before the Menu
Batocera boots from USB but no controller input reaches the menu. Run these practical checks to diagnose a controller not detected and restore input.
Batocera Controllers Not Detected: Fix No Input at the Menu
Troubleshoot Batocera when your controller isn't detected at the menu. Step-by-step checks for USB, Bluetooth, and controller configuration.
Batocera Controller Not Detected: Fix No Input at the Menu
Troubleshoot a controller that is not detected in Batocera when booting from USB. Check connections, ports, and EmulationStation input settings to restore menu control.
Batocera USB Not Booting: Fix the Missing Bootloader
Step-by-step fix when your Batocera USB drive won't boot because the bootloader is missing or misconfigured. Learn to check, repair, and verify.
Batocera USB Boot Fails: Check the Image, Mode, and Drive
A practical sequence for a Batocera USB that is ignored or black-screens: verify the image, rewrite the drive, match UEFI or legacy mode, then test a controller and one game.