Troubleshooting guide
Batocera Black Screen After Boot: Isolate the Display Handoff
Category: Game Console Boot
batocera black screen after boot. You boot Batocera from USB with a controller, see the splash, and then the display goes black before you can diagnose it. This is a display handoff problem, not a dead system, so work through one variable at a time.
Confirm the machine is still running
Wait two minutes, then press a controller button and listen for menu sounds. If you hear them, the PC is alive and only video is lost. If the controller is unresponsive, power off and reseat the USB drive, then try a different USB port, preferably rear USB 2.0.
Test the display path
Power off, disconnect any adapter or KVM, and connect the monitor directly with the cable you use for another device. Boot again. If the splash returns and then blacks out, the handoff is failing. Next, boot with only the monitor connected and no controller receiver; if the menu appears, the receiver is interfering. If the screen stays black, try a different cable and port on the monitor.
Verification test
After any change, boot to the splash and wait for the menu. Success means the menu stays visible for one minute and controller input moves the selection. A black screen after boot with no menu means the change did not fix the handoff.
Rollback and recovery
If a change makes things worse, revert it before trying another step. Keep a second USB drive with a known-good Batocera image so you can compare behavior without altering your main install. Do not edit boot files until you have confirmed the machine reaches the menu with a direct display connection.
If the display still drops after these checks,

Ask for help with your GPU, cable type, and whether menu sounds play.